
EG_GenPro53e_1040_UG_003_UK
Page 58 / 71
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications
8.2.2 Audio interface
The audio interface is available via the RJ 9 4/4 connector, (see paragraph 7.9.1 Microphone inputs, 7.9.2
Loud-speaker outputs (Speaker)) and pin 14 of the 14-pin connector for the Buzzer (see paragraph 7.9.3
8.2.2.1 Microphone
Polarization characteristics for a Microphone HANDSET
Polarization output
Parameter/Conditions
Min
Typ
Max
Units
Polarization tension
Set to 2.0 V
1.9
2.1
V
Set to 2.5 V
2.4
2.6
V
Polarization current
2.0
mA
Recommended characteristics for the Microphone
Input micro
Parameters /Conditions
Min
Typ
Max
Units
Maximum Input Range –
Mic(+) to Mic(-)
Inputs 3 dBm0 (Max. digital
sample amplitude when PGA
gain set to 0 dB)
32.5
mV
RMS
Nominal Ref. Level –
Mic(+) to Mic(-)
Differential MIC
-10
dBm0
Differential Input Resistance –
Mic(+) to Mic(-)
Differential MIC,
MICAMP
gain = 25.6 dB
36 k
Ω
Microphone Pre-Amplifier Gain
Differential MIC
25.6
dB