background image

 

EG_GenLoc31e_988_CL_002_UK 

Page 4 / 22

 

 

Descriptions and non-contractual illustrations in this document are given as an indication only. 

 ERCO&GENER reserves the right to make any modifications.

 

DISCLAIMER OF WARRANTY 

 
This Software is provided free of charge on an 'as is' basis. No warranty is given by ERCO&GENER in 
relation to the Software concerning the uses to which it may be put by you, the user, or its merchantability, 
fitness or suitability for any particular purpose or conditions; and/or that the use of the Software and all 
documentation relating thereto by the Licensee will not infringe any third party copyright or other intellectual 
property rights. 
 
 
 

LIMIT OF LIABILITY 

 
In no event shall ERCO&GENER be liable for any loss or damages whatsoever or howsoever caused arising 
directly or indirectly in connection with this license, the Software, its use or otherwise except to the extent 
that such liability may not be lawfully excluded. Notwithstanding the generality of the foregoing, 
ERCO&GENER expressly excludes liability for indirect, special, incidental or consequential loss or damage 
which may arise in respect of the Software or its use, or in respect of other equipment or property, or for loss 
of profit, business, revenue, goodwill or anticipated savings. 
 
 
 
In its continuing research into improving its products, ERCO&GENER reserves the right to modify its 
products and documentation at any time. 
 
 
 

TRADEMARKS 

 
WAVECOM®, WISMO®, MUSE Platform® are filed or registered trademarks of Wavecom S.A. in France or 
in other countries. All other company and/or product names mentioned may be filed or registered trademarks 
of their respective owners. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

This document is the sole and exclusive property of ERCO&GENER. Not to be distributed or divulged 

without prior written agreement. Ce document est la propriété exclusive de ERCO&GENER. Il ne peut être 

communiqué ou divulgué à des tiers sans son autorisation préalable. 

 

Содержание Genloc 31e























Отзывы: