erc MICRO BOOMERANG RC Ready, Руководство пользователя

Страница: 8 / 12

trimming the Model
If you find that your model does not fly
straight, it may be necessary to adjust the
trim for straight and level flight.
Trimming is best done when flying at 1/2
to 2/3 power.
rudder trim
If the model appears to turn slightly to the
right or left, it may be required to adjust
the rudder trim.
If the model is turning to the left, press
the right rudder trim until the model flies
level.
If it is turning to the right, press the left
rudder trim.
You should only use one or two presses
at a time so the model is not over-
trimmed and begins turning the opposite
direction.
elevator trim
If the model is climbing or diving in flight,
it may be necessary to adjust the eleva-
tor trim.
If the model is climbing, you will need to
press the down elevator trim.
If the model is diving, it will require that
you press the up elevator trim.
As with the rudder, only press the trim
once or twice until the model flies level to
avoid over- trimming.
(the instructions on this page relate to Mode 2 transmitters).