DISMANTLING AND ASSEMBLING
Bipolar LAP forceps (E) and bipolar LAP scissors (E)
Dismantling the product
The product must be cleaned and disinfected in disassembled condition with jaws opened.
Caution: Never pull the jaws apart
manually, as this would cause damage
to the instrument.
1 Pull out the connecting cable from the
handle (no illustration).
2 Press both unlocking buttons (
d
) on the
handle simultaneously and remove the shaft
tube from the handle.
3 Screw the insert out of the shaft tube,
grasping it by the joint sleeve (
e
).
4 Withdraw the insert from the shaft tube.
5 To open the jaws, hold the insert by the
joint sleeve (
e
) and push the rod (
b
) in the
direction of the jaws.
Assembling the product
Caution: Never press the jaws together
manually, as this would cause damage to
the instrument.
1 To close the jaws, hold the insert by the
joint sleeve (
e
) and pull the rod (
b
).
2 Insert the insert (
c
) into the shaft tube (
b
).
3 Screw in the insert up to the stop position,
grasping it by the joint sleeve (
e
).
4 Press the rear unlocking button on the
handle (
d
) and insert the shaft tube into the
handle until it snaps into place at the stop
position.
The complete instrument
The three disassembled components:
a Handle, b Shaft tube and c Insert
d
d
e
e
b
e
c
b
d
b
e
c
a
b
For the complete notes on use, refer to
erbe-med.com