background image

02

UK plug (only for UK market)

Replacement of the plug shall always be carried out by the manufacturer of the tool or 

his service organization and follow the instructions below. 

IMPORTANT: The wires in the mains lead are coloured in accordance with the following 

code:

Blue – Neutral Brown – Live

As the colours of the wire in the mains lead of this product may not correspond with 

the coloured marking identifying the terminals in your plug, proceed as follows. The 

wire, which is coloured blue, must be connected to the terminal, which is marked with 

N  or  coloured  black. The  wire,  which  is  coloured  brown,  must  be  connected  to  the 

terminal, which is marked L or coloured red.

13

 AMP fuse 

approved to 

BS 1362

Brown L(Live)

Cable grip

Outer sleeve

firmly clamped

Connect

Blue to

N(Neutral)

WARNING!

Never connect live or neutral wires to the earth terminal of 

the plug, which is marked with E.

Only fit an approved 

13 

Amp BS 1363 or BS 1363/A plug and the correctly 

rated fuse. If in doubt, consult a qualified electrician.

If  a  moulded  plug  is  fitted  and  has  to  be  removed  take  great  care  in 

disposing of the plug and severed cable, it must be destroyed to prevent 

engaging into a socket.

Transportation

WARNING! 

Always carry the product by its main handle.

Never use the cord for carrying the product. 

1. Switch the product off and disconnect it from the power supply. Remove blade if

necessary.

2. Protect the product from any heavy impact or strong vibrations which may occur

during transportation in vehicles.

3. Secure the product to prevent it from slipping or falling over.

Storage

1. Switch the product off and disconnect it from the power supply.

2. Clean the product as described above.

3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated

place.

4. Always store the product in a place that is inaccessible to children. The ideal stor-

age temperature is between 10°C and 30°C.

5. We  recommend  using  the  original  package  for  storage  or  covering  the  product

with a suitable cloth or enclosure to protect it against dust.

Recycling and disposal

Waste  electrical  products  should  not  be  disposed  of  with  household 

waste.  Please  recycle  where  facilities  exist.  Check  with  your  local 

authority or local store for recycling advice.

2

4

24

Содержание ERS1100-1





























Отзывы: