02
Switching on/off (Fig. F)
Operate the product either in instant or continuous mode.
Instant mode
Switch the product on by pressing the on/off switch (8) and release the trigger to stop
it.
Continuous mode
1. Switch the product on by pressing the on/off switch (8) and hold it in position.
2. Press the lock-on button (7) to lock the on/off switch (11).
3. Release both switches. The on/off switch (7) is now locked-on for continuous use.
4. Depress and release the on/off switch (7) to switch the product off.
Speed control
The on/off switch (7) of this product is combined with a speed control. The speed is
controlled by how far the trigger switch is depressed.
03
Automatic LED work light
LED work light (11) will illuminate the working zone automatically when the product is
switched on.
WARNING!
Do not look directly into LED light!
04
Pendulum selector
Adjust the pendulum speed according to the workpiece material and thickness.
Illustration
Pendulum speed
Application
Off
Fine cuts in thin workpieces;
cutting surface quality is more
preferred than speed; cutting
metal.
On
Fast cuts in soft materials
(e.g. softwood); cutting in the
direction of the wood grain.
Operation
01
Cutting (Fig. G)
WARNING!
During operation fine dust will be generated!
These dusts are highly inflammable and explosive! Do not smoke during
operation, keep heat sources and open flames out of the working area!
Always wear a dust mask to protect yourself against hazards resulting
from fine dust!
NOTE:
Always make a trial cut before working on the actual workpiece,
especially after replacing the blade or adjusting the guide plate (1).
1. Insert the blade into the tool socket (10).
2. Adjust the desired position of guide plate (1).
3. Cut in the direction of the wood grain whenever possible to avoid jamming the saw
blade and fraying edges.
4. Always add cooling liquid along the cutting line to reduce heat when cutting metal.
5. Hold the product with one hand on the main handle (9), and with the other hand on
the auxiliary handle (4).
6. Switch the product on and wait until it runs at full speed before placing it on the
workpiece.
7. Carefully lead the product toward the workpiece. Place the guide plate (1) flat on
the workpiece and push the product at an even speed.
8. Lift the product from the workpiece before switching it off.
21
20
