Erbauer ERO400, Оригинальное руководство пользователя, Страница: 18 / 28

03
Dust extraction (Fig. B, C, D, E, F)
The product can be used with the dust collection box (7) or an external dust extraction
device.
Dust collection box
1. Attach the dust collection box (7) to the dust extraction outlet (4). Fig. B.
2. To remove the dust collection box (7), press both release levers (7b) and pull the
box off. Fig. C.
3. To empty the dust collection box, open the window of dust collection box (7c) by
pressing the release button (7a). Fig. D.
External dust extraction device
1. Attach an external dust extraction device, e.g. a suitable vacuum cleaner
attachment (Ø35mm), to the dust extraction adaptor (8) and then attach to dust
extraction outlet (4). Fig. E.
2. To remove the dust extraction adaptor, press both release levers (8a) and pull the
dust extraction adaptor off. Fig. F.
Use
Intended use
This product is intended for dry sanding of wood, plastic, metal, fillers and coated
surfaces. This product should not be used on other materials or those harmful to
health.
Before you start
01
Protection
Controls
01
On/Off switch (Fig. G)
Operate the product in continuous mode.
1. Switch the product on by pressing the “ON / ─” button of the on/off switch (1).
2. Press the “OFF / O” button of the on/off switch (1) to switch the product off.
02
Speed dial (Fig. H)
Limit the maximum speed using the speed dial (3).
1. Turn the speed dial (3) clockwise to increase the maximum speed. A higher setting
is suitable for sanding with fine-grained sanding papers to achieve a fine finish.
2. Turn the speed dial (3) anti-clockwise to decrease the maximum speed. A lower
setting is suitable for sanding with coarse-grained sanding papers to remove
paints and varnishes.
18