18V LI-ION TORCH
Red Flashing
Green Off
Defective battery, after
pre-charge 30 minutes with
trickle current, the total
battery voltage is still less
than 15.0v.
Red ON
Green Off
Charging
Green ON
Red Off
Power On and Fully
Charged
Green Flashing
Red Off
The temperature of battery
pack is less than 0
℃
or
more than 40
℃
4. Remove or install battery pack
Press the battery pack latch and remove the
battery pack from the tool. After recharge slide
the battery pack into tool’s battery port. A simple
push and slight pressure will be sufficient.
5. On/off switche
To start your light, depress the switch. To turn off,
depress the switch again.
6. Multi-position function
This allows your light to be aimed / directed in
some different positions to free your hands for
working. The section can be rotated independently
for a direction combination of position (See Fig.3-
1 & 3-2).
7. Bulb replacement
Warning:
The bulb head cover and lens
become hot when used - it could burn your
fingers. Allow to cool for several minutes before
replacing bulb.
Remove the battery pack from the lamp. Unscrew
the lamp head cover counter-clockwise. Take out
the bulb from the spring (9) (See Fig.4). Use a new
bulb to replace the old one (See Fig.5). Check the
bulb is seated in the center of the spring. Replace
the head cover (2) by rotating clockwise, ensure
it is located correctly and do not force it when
fitting.
Note: Always uses the correct bulb
specification.
Fig 3-1
Fig 3-2
Fig 4
Fig 5
9
