Erbauer ERB8DLC, Руководство пользователя

Страница: 5 / 16

200MM BENCH GRINDER
ADDITIONAL SAFETY RULES FOR BENCH GRINDERS
1. Always remove the plug from the mains socket before making any adjustments or
maintenance, including changing the wheel.
2. Always wear eye protection and check that the eye shields on the grinder are properly
adjusted.
3. Always turn the grinder off when it is not in use and never leave it unattended
without first switching off and removing the power plug. Never leave the grinder
until the grinding wheels have come to a complete stop.
4. Make sure that any replacement wheel is rated at 3000RPM or higher.
5. Do not let anyone under 18 years operate this tool.
6. Rags, cloths, cord, string and the like should never be left around the work area.
7. If you are interrupted when operating the tool, complete the process and switch off
before looking up.
8. Periodically check that all nuts, bolts and other fixings are properly tightened.
9. Do not use a wheel that has received a blow, especially to the side of the wheel.
10. Replace a cracked or suspect wheel.
11. Always allow a new wheel to run for a few minutes at full speed before using it.
Stand to one side at start up.
12. Check that the wheel rotates freely each time before start up.
13. Do not use the grinder unless all the guards are properly fitted and secure.
14. Check that the work rests are properly adjusted before commencing use.
15. Do not overload the grinder. Allow the grinder to run at full speed, or close to full
speed during use.
16. Never apply excessive pressure to the wheel. It might shatter causing personal
injury.
17. Make sure that the wheel is not in contact with the work when you start the
grinder.
18. When using the grinder, use safety equipment including safety goggles or shield,
ear protection, dust mask and protective clothing including safety gloves.
Important note
Remove the mains plug from socket before carrying out any adjustment or servicing.
Ensure your mains supply voltage is the same as your tool rating plate voltage.
SYMBOLS
Read the manual Warning Wear gloves
Wear dust mask,eye & ear protection
Conforms to relevant safety standards