Erbauer ERB620HTL, Инструкция по эксплуатации, Страница: 8 / 13

250W MULTI CUTTER ERB620HTL
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Intended Use
The power tool is intended for sawing and
remodelling wooden materials, plastic, plaster, non-
ferrous metals and fasteners (e.g. nails and clamps)
as well as for working on soft wall tiles and for dry
grinding of small surfaces. It is especially suitable
for working close to edges and for flush cutting.
1. MOUNTING ACCESSORIES
Caution: For all work or when changing
accessories, always wear protective gloves.
Avoid danger of injury from the sharp edges of the
accessories. Accessories can become very hot
while working, presenting danger of burns! Make
sure the tool is unplugged prior to changing
accessories.
Warning: To reduce the risk of injury, do
not let the sharp side of the accessory
face back toward the user’s hand.
The tool free system makes you change the
accessories without using an hex key.
Fitting universal fit accessories
- Flip the Tool Free Accessory Clamping Lever
forward to the open position (See Fig.1).
- Rotate the Clamping Lever counterclockwise to
loosen the Flange. (See Fig. 1)
- Insert the accessory onto the Universal Fit
Accessory Interface, then press down the
Flange with finger to keep blade temporarily
secure (See Fig. 2)
- Rotate the Lever clockwise until accessory is
tightened Securely (See Fig. 3).
- Flip lever back down. (See Fig. 3)
- Return lever to seated position. (See Fig. 3)
Change universal fit accessories
- Flip the clamping lever to open position.
- Rotate the clamping lever anti-clockwise to loose
the flange until the blade can be remove.
Fig. 1
Fig. 4
Fig. 2
Fig. 3
Fig. 5
on off
Fig. 6
Fig. 7
2
3
1
2
1
TECHNICAL DATA
Voltage 220-240V~ 50Hz
Power input 250W
Oscillation speed 11000-20000/min
Oscillation angle 3.2°
Protection class
/II
Machine weight 1.8Kg
NOISE INFORMATION
A weighted sound pressure L
PA
: 85dB(A) K
PA
=3.0dB(A)
A weighted sound power L
WA
: 96dB(A) K
WA
=3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
ACCESSORIES
High carbon steel precise saw blade 34x92mm 1pc
HSS Segment saw blade 1pc
Sanding plate 1pc
80# Sanding sheet 5pc
120# Sanding sheet 5pc
180# Sanding sheet 5pc
Big flange (pre-fitted on machine) 1pc
Small flange 1pc