background image

3. If your hammer work efficiency is too low, please 

add sufficient grease in the grease box.

4. If your hammer use in low efficiency, please check 

whether the tool is blunt.

5. If a fault can not be rectified, return the tool to an 

authorized dealer for repair.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be 

disposed of with household waste. Please 

recycle where facilities exist. Check with your 

Local Authority or retailer for recycling advice. For 

further information visit www.recycle-more.co.uk.

PLUG REPLACEMENT 

(UK & IRELAND ONLY)

If you need to replace the fitted plug then follow the

instructions below.

IMPORTANT

The wires in the mains lead are coloured in accordance

with the following code:

BLUE =NEUTRAL

Brown = Live

As the colours of the wires in the mains lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows. The wire which is coloured blue

must be connected to the terminal which is marked

with N. The wire which is coloured brown must be

connected to the terminal which is marked with L.

Warning:

Never connect live or neutral wires to the earth

terminal of the plug. 

Only fit an approved 13AMP

BS1363/A plug and the correct rated fuse.

Note:

 If a moulded plug is fitted and has to be

removed take great care in disposing of the plug

and severed cable, it must be destroyed to prevent

engaging into a socket.

 

13 Amp fuse approved

to BS 1363

Connect

Blue to N

(neutral)

Outer sleeve

firmly clamped

Brown L(live)

Cable grip

Содержание ERB575DRH





















Отзывы: