Erbauer ERB561SRG, Руководство пользователя

Страница: 12 / 24

700W HVLP SPRAY GUN ERBAUER
Work area
1. Cover a wide area surrounding the
spraying area thoroughly and keep
the spraying area clean, dry and free
of grease.
2. Use a piece of cardboard as a shield
to catch overspray at the edges of the
work to protect the other surfaces.
3. Roughen smooth surfaces before
painting.
Paint
1. Strain material through filter or a paint
strainer.
2. Thoroughly mix and thin the paint in
accordance with the paint
manufacturer's instructions. The
correct viscosity of the paint will
greatly influence the paint results. Mix
the required total amount of paint to
assure a consistent viscosity.
3. Remove the cup (18) from the lid (19)
and fill it with the paint according to
the scale on the cup (Fig. 1). Only fill
as much paint or thinning agent as
required.
4. Replace the cup (18) onto the spray
gun by attaching with the lid (19).
Make sure the cup and the lid have
been attached tightly.
Air hose
1. This product is delivered with an air
hose (10). It is completely pre-stored
in the compartment (13) for the safety
of transportation. Remove the air
hose (10) from the compartment (13)
to required length before assembly
and operation.
2. Attach the air hose (10) to the air
outlet nozzle (9) by securing the pins
(10b) into the slots (9a) (Fig. 2).
3. Attach the air hose (10) to the air inlet
nozzle (14) of the spray gun by
securing the pins (10b) into the slots
(14a) (Fig. 3).
Fig. 1
19
18
!1.000
1
2
Fig. 2
14
10
2
1
2
2
14a
10b
1
Fig. 3
10b
9a
9
10
1
2