Erbauer ERB406, Руководство пользователя

Страница: 6 / 16

5.Wear eye protection when operating this tool.
6.If possible, ensure the workpiece is firmly clamped to prevent movement.
7.Your finishing sander is a hand held tool, do not clamp your finishing sander.
8.Before sanding, check the area is free of nails, screws, etc.
9.Never stop the finishing sander by applying a force to the baseplate.
10.Only use paper in good condition. Do not use torn or worn paper.
11.Do not sand material containing asbestos due to a health risk.
12.Do not sand lead based paint due to the risk of lead poisoning.
13.Do not eat or drink in the working area of the sander.
14.Do not allow people to enter the working area without wearing a dust mask.
15.Where possible, seal off the working area to contain the dust for later removal.
16.Always wear a dust mask.
17.Your tool is designed for dry sanding only, not wet sanding.
18.Your tool is designed for general purpose light polishing of wood and metals.
19.Do not sand magnesium material due to the risk of fire.
20.Always use the appropriate safety equipment that is required for the product. e.g.
Goggles / Safety Spectacles, Ear defenders (essential with tools with a noise rating of
over 85 dbA), Gloves and face masks. In all cases ensure that the safety equipment is
in good condition.
SYMBOLS
Read the manual
Warning
Wear gloves
Wear dust mask,eye & ear
protection
SFX-ERB406-M-050608.indd 6 2005-6-8 14:49:55