Erbauer ERB401SDR, Оригинальное руководство пользователя

Страница: 16 / 20

360W 1/2 SHEET SANDER 360W 1/2 SHEET SANDER
WORKING HINTS FOR YOUR FINISHING
SANDER
1. If your power tool becomes too hot, especially
when used at low speed, set the speed to
maximum and run it with no load for 2-3 minutes
to cool the motor. Avoid prolonged usage at
very low speeds. Always use sand paper that is
suitable for the material you want to sand.
2. Always ensure the work-piece is firmly held or
clamped to prevent movement.
3. Any movement of the material may affect the
quality of the sanding finish.
4. Start your sander before sanding and turn it off
only after you stop sanding. For the best results,
sand wood in the direction of the grain.
5. Do not start sanding without having the sandpaper
fitted.
6. Do not allow the sandpaper to wear away it will
damage the base-plate. The guarantee does not
cover base-plate wear and tear.
7. Use coarse grit paper to sand rough surfaces,
medium grit for smooth surfaces and fine grit for
the final surfaces. If necessary, first make a test
run on scrap material.
8. Use only good quality sandpaper.
9. The sandpaper controls the sanding efficiency,
not the amount of force you apply to the
tool. Excessive force will reduce the sanding
efficiency and cause motor overload. Replacing
the sandpaper regularly will maintain optimum
sanding efficiency.