Erbauer ERB382SDR, Оригинальное руководство пользователя

Страница: 15 / 20

450W 150MM ROTARY SANDER
3. SWITCHING ON/OFF (See Fig.4 )
On /Off Switch
Depress to start and release to stop your tool.
Lock-On Switch
Depress on/off switch (2) then lock-on button
(1), release on/off switch first and lock-on
button second. Your switch is now locked on for
continuous use. To switch off your sander just
depress and release the on/off switch
4. AUXILIARY HANDLE (See Fig.5 )
The auxiliary handle makes possible comfortable
handling and optimum force application, especially
for high material removal. The position of the
auxiliary handle can be adjusted using winged
screw.
5. SPEED PRE-SELECTION
The required speed can be pre-selected with the
variable speed control (8) (See Fig.6 )
(whilst running).
6. SANDING PLATE BRAKE
An integrated sanding plate brake reduces the
speed when running at no load so that scoring is
avoided when placing the machine on the work
piece. A continuously increasing no-load speed
over the course of time indicates that the sanding
plate brake is worn and must be replaced by an
authorized customer service location.
7. SANDING SURFACES
Place the machine with the complete Sand
paper on the surface to be worked. Ensure
uniform sanding pressure. Less sanding pressure
increases the sanding capacity and protects
the machine and the sanding tool. The removal
capacity and the sanding pattern are determined
mainly by the selection of the Sand paper (grain
size), the speed of the sanding plate and the
application pressure.
Rough Sanding
Attach a Sand paper with coarse grain. Apply only
light sanding pressure to achieve increased material
removal.
Fing Sanding
Attach a Sand paper with fine grain. With moderate
pressure, move the machine in a circular pattern or
alternately in lengthwise and crosswise directions
over the work piece. Do not tilt the machine to
Fig. 1
Fig. 4
Fig. 5
Fig. 6
Fig. 3
Fig. 2
9
2
1
8
Fig. 1
Fig. 4
Fig. 5
Fig. 6
Fig. 3
Fig. 2
9
2
1
8
Fig. 1
Fig. 4
Fig. 5
Fig. 6
Fig. 3
Fig. 2
9
2
1
8