Erbauer ERB239MSW, Оригинальное руководство пользователя

Страница: 28 / 40

ERBAUER 254MM (10”) DOUBLE BEVEL SLIDING MITRE SAW
Warning:
To avoid injury from
materials being thrown, always unplug
the saw to avoid accidental starting, and remove
small pieces of material from the table cavity.
6. Mitre cut
1) When a mitre cut is required, unlock the
mitre table by turning the mitre handle (1)
counterclockwise.
2) While holding the mitre handle, lift up on the
positive stop locking lever (2).
3) Rotate the mitre table to the right or left with
the mitre handle.
4) When the table is in the desired position, as
shown on the mitre scale (3), release the positive
stop locking lever and tighten the mitre handle.
The table is now locked at the desired angle.
Positive stops are provided at 0°, 15°, 22.5°,
31.6° and 45°. (See fig. 30)
IMPORTANT
Always tighten the mitre table lock handle before
performing every cutting operation.
7. Bevel cut
1) When a bevel cut is required, loosen the bevel
lock handle (1) by turning it clockwise.
2) Tilt the cutting head to the desired angle, as
shown on the bevel scale (2).
3) The blade can be positioned at any angle, from a
90° straight cut (0° on the scale) to a 45° right or left
bevel. Tighten the bevel lock handle (1) to lock the
cutting head in position. Positive stops are provided
at 0°, 33.9° and 45°.(See fig 31)
Note:
When cutting at 45 degrees, ensure guard
does not catch on work or machine base plate.
Fig 30
Fig 31
3
1
1
2
2