manualshive.com logo in svg

Erbauer ERB2151SE, Руководство пользователя

Поделиться
Скачать
Erbauer ERB2151SE Скачать руководство пользователя страница 7

W

7

ERBAUER 216MM (8”) SLIDING MITRE SAW

12. When the correct blade to cut the material has been fi tted, this saw is 

recommended for cutting wood, non-ferrous metal and plastic only.

13. Do not use saw blades with High speed steel (HSS) or damaged or 

deformed.

14. Replace the table insert when worn.
15. Use only saw blades recommended by the manufacturer and which are 

the exact bore and diameter required for this machine.

16. Connect your mitre saw to a dust collecting device (I. D.Ø32mm) when 

sawing.

17. Select saw blades in relation to the material to be cut.
18. Check the maximum depth of cut.
19. When sawing long work pieces, always use extra support to provide 

better support, and use clamps or other clamping devices.

20. The operator is adequately trained in the use adjustment and operation 

and operation of the machine.

21. Provide for adequate room lighting at your workplace or for adequate 

lighting of the immediate work area.

22. When fi tted with laser no exchange with different type of laser is 

permitted. Repairs shall only be carried out by the laser manfacturer or 
an authorised agent. 

23. Refrain from removing any cut-offs or other parts of the workpiece 

from the cutting area whilst the machine is running and the saw head 
is not the rest position.

24. Never stand on this tool. Serious injuries could occur when this tool 

tips over or when coming in contact with the saw blade.

        

WARNING:

 the operation of any mitre saw can result in foreign objects being thrown 

        into  your eyes, which can result in severe eye damage. Before beginning power tool 
operation, always wear safety goggles or safety glasses with side shield and a full face 
shield when needed.

        

Warning:

 If any parts are missing, do not operate your mitre saw until the missing 

        parts are replaced. failure to follow this rule could result in serious personal injury.
        

Caution:

 Do not let familiarity with your mitre saw makes you careless. Remember 

        that a careless fraction of a second is suffi cient to cause severe injury.

             

Содержание ERB2151SE

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды