Erbauer ERB20GM, Руководство пользователя

Страница: 10 / 16

indicated on your mixer. The rotation will now
be forward rotation. Push the forward/reverse
selector switch to “L” position indicated on your
mixer. The rotation will be reverse rotation.
Note:
Never change the forward/reverse selector
switch whilst the mixer in operation or the
on/off switch is locked as this will damage
the mixer.
6. Removing the chuck
(see fig7)
The adapter of chuck and chuck can be removed
with a skew wedge.
1.Turn the chuck until you can see the drive key
through the side opening.
2. Insert the skew wedge into the side opening.
3. Tap the skew wedge with a hammer until the
adapter of chuck and chuck is released.
4 To remove the chuck from adapter of chuck, you
can insert a bar into the hole of chuck. Then tap
the bar with a hammer until the adapter of chuck
is released.
Working hints for your mixer
1. Mixing
When you insert the mixer into the product
is mixed or take it out of the product is mixed,
reduce its speed. Once the mixer is fully immersed
in the product, increase the speed to maximum
to ensure that the motor is cooled adequately.
During the mixing process guide the machine
through the mixing vessel. Continue to mix the
product until it is fully homogenized. When you
have finished the mixing work, clean the mixer.
2. Pilot holes
When drilling a large hole in tough material (i.e.
steel), we recommend drilling a small pilot hole
first before using a large drill.
3. Cool the motor
If your power tool becomes too hot, set the speed
to maximum and run no load for 2-3 minutes to
cool the motor.
Fig 6
Fig 7
Reverse
rotation
(L)
Forward
rotation
(R)
Skew wedge