Erbauer ERB105K, Руководство пользователя

Страница: 11 / 16

160W DETAIL SANDER
5. Sanding
Always hold the sander as shown in fig 4.
Move the sander in long, sweeping strokes across
the sanding surface. Light pressure is all that is
needed for sanding, polishing and scrubbing. Let
the sander do the work. Check your work often.
This sander removes material quickly (See fig 5).
Note:
Applying excessive pressure will slow
down the sander and produce unsatisfactory
results.
7. Selecting the right sander paper
Selecting the correct grit of sander paper is an
extremely important decision that will allow you
to achieve the best quality sanding finish.
Coarse grit will remove most material and finer
grit will give you the best finish in all sanding
operations. The grit which will be choosed to
do the job is determined by the condition of the
surface.
If the surface is rough:
Start with coarse grit (sold separately) and sand
until the surface is uniform. Then use medium to
remove any scratches left by the coarse grit. Then
use finer grit (sold separately) for finishing the
surface.
Note:
Always continues sanding with each grit
until the surface is uniform.
Using the polishing and scrubbing pads
This tool is also ideal for cleaning, polishing and
removing rust with the polishing and scrubbing
pads (sold separately).
MAINTENANCE
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool.
Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth.
Fig 4