Erbauer EMST200, Оригинальное руководство пользователя

Страница: 9 / 20

HEALTH ADVICE
WARNING!
When drilling, sanding, sawing or grinding,
dust particles will be produced. In some instances,
depending on the materials you are working with, this
dust can be particularly harmful to you (e.g. lead from
old gloss paint).
- You are advised to consider the risks associated with the materials you are working
with and to reduce the risk of exposure. You should:
- Work in a well-ventilated area.
Inspect tool cord periodically and if damaged have them replaced by an authorised
service facility. Inspect extension cords periodically and replace if damaged.
Keep handles dry, clean and free of oil or grease.
13.
Disconnect tools.
When not in use, before servicing and when changing
accessories such as blades, bits and cutters, disconnect tools from the power
supply.
14.
Remove adjusting keys and wrenches.
From the habit of checking to see
that keys and adjusting wrenches are removed from the tool before turning it
on.
15.
Avoid unintentional starting.
Ensure switch is in the “off” when plugging in.
16.
Use outdoor extension leads.
When tool is used outdoors, use only extension
cords intended for outdoor use and so marked.
17.
Stay alert.
Watch what you are doing. Use common sense. Do not operate tool
when you are tired.
18.
Check damaged parts.
Before further use of the tool, it should be carefully
checked to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting and any other conditions that may affect its operation. A
guard or other part that is damaged should be properly repaired or replaced by
an authorised service centre unless otherwise indicated in this instruction manual.
Have defective switches replaced by an authorised service facility. Do not use
the tool if the switch dose not turn it on and off.
19.
Warning.
The using of any accessory or attachment other than those
recommended in this instruction manual may present a risk of personal injury.
20.
Have your tools repaired by qualified person.
This electrical tool complies
with the relevant safety requirements. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in
considerable danger to the user.
21. If the replacement of the supply cord is necessary, this has to be done by
the manufacturer or his agent in order to avoid a safety hazard.
09