Erbauer EMST200, Оригинальное руководство пользователя

Страница: 14 / 20

02
UNPACKING
- Unpack all parts and lay them on a flat, stable surface.
- Remove all packing materials and shipping devices if applicable.
- Make sure the delivery contents are complete and free of any damage. If you find
that parts are missing or show damage do not use the product but contact your
dealer. Using an incomplete or damaged product represents a hazard to people
and property.
- Ensure that you have all the accessories and tools needed for assembly
and operation. This also includes suitable personal protective equipment.
03
ASSEMBLING THE MACHINE
YOU WILL NEED
(items not supplied)
12mm Open-end wrench or adjustment wrench
19mm Open-end wrench or adjustment wrench
MOUNTING THE WHEELS TO THE STAND (A)
- Insert wheel into the wheel locator and secure with nut and bolt . Repeat for
the other wheel.
ADJUST THE WORK HEIGHT (B)
- Pull downwards the quick release and raise the table,while placing foot on wheel
cross member.Release quick release when stand is at correct height.
TO INSTALL THE WORK SUPPORT (C )
- Slide the work support shaft through the hole in the top of the work support
mounting bracket.
- Ensure that the work support is orientated correctly.
- Insert the height adjustable knob through the small hole on the side of the work
support mounting bracket and tighten to secure.
WARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result
in accidental starting and possible serious injury.
LOCK AND UNLOCK WHEELS (D & E)
- Lock the wheel by depressing the lock mechanism attached to each wheel.
- Pressing down on the end (marked ), locks the wheel .(pressing down
where it says” ” unlocks the wheel ).
14