34
EN
Problem
Possible cause
Solution
3. Product does not
cut
3.1. Not connected to power
supply
3.2. Saw blade is worn or
damaged
3.3. Bevel and mitre angle
incorrectly adjusted
3.1. Connect to power supply
3.2. Replace with new one
3.3. Check and adjust
according to the
instruction manual
4. Unsatisfactory
result
4.1. Dull / damaged saw
blade
4.2. Cutting angle is incorrect
4.3. Saw blade not suitable
for work piece material
4.4. Overheated saw blade
4.5. Workpiece not clamped /
placed properly
4.1. Replace with new one
4.2. Adjust the bevel and / or
mitre cutting angle
4.3. Use proper saw blade
4.4. Let the work cool down
before using again
4.5. Clamp / place the
workpiece properly before
cutting
5. Excessive
vibration or noise
5.1. Saw blade is dull/
damaged
5.2. Bolts/nuts are loose
5.1. Replace with a new one
5.2. Tighten bolts/nuts
Recycling and disposal
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or local store for recycling advice.
