background image

13

12

f. Do

 not expose a battery pack or tool to fire or excessive 

temperature. 

Exposure to fire or temperature above 130 °C 

may cause explosion.

g. Fo

llow all charging instructions and do not charge the 

battery pack or tool outside the temperature range 

specified in the instructions. 

Charging improperly or at 

temperatures outside the specified range may damage the 

battery and increase the risk of fire.

SERVICE

a. Ha

ve your power tool serviced by a qualified repair person 

using only identical replacement parts. 

This will ensure that 

the safety of the power tool is maintained.

b. N

ever service damaged battery packs. 

Service of battery 

packs should only be performed by the manufacturer or 

authorized service providers.

PLANER SAFETY WARNINGS

a.  Wait for the cutter to stop before setting the tool down. 

An exposed rotating cutter may engage the surface leading to 

possible loss of control and serious injury.

b.  Use clamps or another practical way to secure and support 

the workpiece to a stable platform. 

Holding the work by your 

hand or against the body 

leaves it unstable and may lead to 

loss of control.

c.  Be aware of kickback.
d.  Turn the product off immediately, if the cutting blade gets jammed.
e.  Never slow down the application tool yourself mechanically. 

Always allow the product to come to complete stop on its own.

f.  Never touch the workpiece with your hand when you are 

working on it.

g.  Do not work overhead.
h.  Ensure that the workpiece is free of foreign objects such as 

screws or nails.

ADDITIONAL SAFETY WARNINGS FOR BATTERY

a. 

Do not connect the positive terminal and negative terminal of 

the battery to each other with any metal object (such as wire).

b. 

Do not carry or store battery together with necklaces, hairpins 

or other metal objects.

c. 

Do not pierce the battery with nails, strike the battery with a 

hammer, step on the battery or otherwise subject it to strong 

impacts or shocks.

d. 

Do not solder directly onto the battery.

e. 

Do not expose battery to water or salt water, or allow the 

battery to get wet.

f. 

Do not disassemble or modify the battery. 

g. 

Do not place the battery in or near fire, on stoves or other 

high temperature locations. Do not place the battery in direct 

sunlight, or use or store the battery inside cars in hot weather. 

h. 

Do not place the battery in microwave ovens, high-pressure 

containers or on induction cookware.

i. 

If you intend to store a battery for a period without use then 

store battery at room temperature (19°C to 25°C), charged 

to about 30 – 50% of capacity. When storing for very long 

periods boost charge the battery once per year to prevent over 

discharge.

Содержание EHP18-Li


















Отзывы: