13
12
f.
Do not expose a battery pack or tool to fire or excessive
temperature.
Exposure to fire or temperature above 130 °C
may cause explosion.
g.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
specified in the instructions.
Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
SERVICE
a.
Have your power tool serviced by a qualified repair person
using only identical replacement parts.
This will ensure that
the safety of the power tool is maintained.
b. N
ever service damaged battery packs.
Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
ELECTRICALLY POWERED GRASS TRIMMER SAFETY WARNINGS
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
WARNING!
When using the product the safety rules must
be followed. For your own safety and that of bystanders
please read these instructions before operating the product.
Please keep the instructions safe for later use.
TRAINING
a. Read the instructions carefully. Be familiar with the controls and
the proper use of the product.
b. Never allow children, persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge or
people unfamiliar with these instructions to use the machine,
local regulations may restrict the age of the operator.
c. Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
PREPARATION
a
. Never operate the product while people, especially children, or
pets are nearby.
b. Wear eye protection and stout shoes and long trousers at all
times while operating the product.
c. Before use, always visually inspect the machine for damaged,
missing or misplaced guards or shields.
OPERATION
a. Avoid using the machine in bad weather conditions especially
when there is a risk of lightning.
b. Use the product only in daylight or good artificial light.
c. Never operate the product with damaged guards or shields or
without guards or shields in place.
d. Switch on the motor only when the hands and feet are away
from the cutting means.
e. Before using the product and after any impact, check for signs
of wear or damage and repair as necessary.
f. Always disconnect the product from the power supply (i. e.
remove the plug from the power supply or the battery pack)
• whenever leaving the product unattended;
• before clearing a blockage;
• before checking, cleaning or working on the product;
• after striking a foreign object;
• whenever the product starts vibrating abnormally.
g. Take care against injury to feet and hands from the cutting
device.
h. Always ensure that the air vents are kept clear of debris.
