background image

21

20

02

 

UNPACKING

Unpack all parts and lay them on a flat, stable surface.

•  Remove all packing materials and shipping devices, if applicable.
• 

Make sure the delivery contents are complete and free of any damage. If you find that parts 

are missing or show damage do not use the product but contact your dealer. Using an 

incomplete or damaged product represents a hazard to people and property.

•  Ensure that you have all the accessories and tools needed for assembly and operation. This 

also includes suitable personal protective equipment

WARNING!

 

The product and the packaging are not children’s toys! 

Children must not play with plastic bags, sheets and small parts! There is a 

danger of choking and suffocation!

03

 

ASSEMBLING THE MACHINE

CHARGING YOUR BATTERY PACK

The battery has been shipped in a low charge condition. Charge it fully before first use. 

Refer to the charger instruction manual for the details.

TO REMOVE OR INSTALL THE BATTERY PACK (A1, A2)

Depress the battery pack release button to release and slide the battery pack out from 

your tool. After recharge, slide it back into your tool. A simple push and slight pressure will 

be sufficient.

BATTERY PACK POWER BAR

The Li-Ion battery pack (5) is equipped with a POWER BAR which is used to give an 

indication of the battery pack’s remaining charge. Press the POWER BAR button (6) to 

check battery charge as below. The LED will stay lit for approximately 5 seconds.

6

76-100% Charge

51-75% Charge

26-50% Charge

5-25% Charge

Flash On Off

under 5% Charge

HOW TO USE THE BELT CLIP (B1, B2)

Screw the Belt clip (9) on the tool with the screw. The Belt clip can be hooked on your belt 

or pocket, etc.

Содержание EDD18-Li-2


















Отзывы: