manualshive.com logo in svg

Erbauer 5059340043357, Оригинальное руководство пользователя

Поделиться
Скачать
Erbauer 5059340043357 Скачать руководство пользователя страница 30

30

Care & maintenance

WARNING! 

Always switch the product off, disconnect the product from 

the power supply and let the product cool down before performing 

inspection, maintenance and cleaning work!

Clean

1.  Clean the product with a dry cloth. Use a brush for areas that are hard to reach.

2.  In particular clean the switches and air vents after every use with a cloth and brush.

3.  Remove stubborn dust with high pressure air (max. 3 bar).

01

Paint sprayer (Figs. Q, R, S)

WARNING! 

Never  use  metal  or  other  objects  that  could  damage  the 

holes in the air cap, spray nozzle and nozzle needle. Never immerse the 

product completely in solvent or other liquids.

NOTE: 

Do not use chemical, alkaline, abrasive or other aggressive 

detergents or disinfectants to clean this product as they might be harmful 

to its surfaces.

It is vital that thorough cleaning is carried out after each use to keep this 

product  working  efficiently.  Failure  to  do  so  will  stop  the  tool  working 

correctly and may invalidate the warranty.

1.  Clean the product immediately after each use as detailed below. Also, if the product 

clogs up during use, carry out the same cleaning procedure. 

2.  Release the switch trigger (8) and switch the product off.

3.  Clean all the outer surfaces and the spray head after each use with a slightly damp 

cloth and a little soap. Use a cleaning brush (32) for hard to reach places.

MNL_Erbauer_GB_EPS800_800W paint sprayer_V1_201020.indd   30

10/20/20   5:03 PM

Содержание 5059340043357











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды