Erbauer 3663602796091, Оригинальное руководство пользователя

Страница: 9 / 32

SAFETY WARNINGS FOR JIG SAW
a)
Hold the power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring or its
own cord.
Cutting accessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an electric shock.
b)
Use clamps or another practical way to secure and support the workpiece
to a stable platform.
Holding the workpiece by hand or against your body
leaves it unstable and may lead to loss of control.
c) The power tool shall not be wet or applied in wet environment.
d)
rating label of the machine.
e) Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
f) Turn the product off immediately, if the cutting blade gets jammed.
g) Never touch the workpiece with your hand when you are working on it.
h) Ensure that the workpiece is free of foreign objects such as screws or nails.
i) Keep the handles dry to ensure safe control. Grip the product securely with
two hands so you have full control at all times.
j) Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
k) Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete
stop before putting it down.
l) Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
m) Always keep the power cord behind the power tool.
Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
Remove any adjusting key or wrench before turning the power tool on.
A
wrench or a key left attached to a rotating part of the power tool may result in
This
Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
Loose clothes, jewellery or
If devices are provided for the connection of dust extraction and
Use
Do not let familiarity gained from frequent use of tools allow you to
A careless action
Do not force the power tool. Use the correct power tool for your
The correct power tool will do the job better and safer at the rate
Any
power tool that cannot be controlled with the switch is dangerous and must be
Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories,
Such preventive safety measures reduce the risk of
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired before
Properly maintained cutting tools with
Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
Use of the power tool for operations different from
Keep handles and grasping surfaces dry, clean and free from oil and
9 8
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and
grease.
Slippery handles and grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.