ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: [email protected]
Instruction manual
03267-03272
Issue: 01/2019
Changes, print, punctuation and other errors reserved!
Page 9
GB - INSTRUCTION MANUAL
Use original spare parts only.
9. SERVICE AND REPLACEMENT PARTS
All rights reserved. This manual is copyrighted. Reproduction in and form (digital, print, etc.) is strictly prohibited
without the written permission of ERBA GmbH.
Our products are packed in order to prevent damage during transport. Packing materials are valuable resurces
and therefore can and should be recycled. The product itself consists of various materials (metals, oils, plastic,
etc.) and should be disposed with care and in accordance with your federal and local disposal regulations.
12. LEGAL INFORMATION
11. DISPOSAL
Legal warranty regulations apply.
10. WARRANTY
8. OPERATION INSTRUCTIONS
Assemble the two handles (4) and tighten the release valve (5) (turn clockwise) – Fig. 1
Put the handle in the socket (3) and execute a pumping motion (up and down) – Fig. 3
Pump untill the piston has reached the required height.
Adjust the crown (1) if necessary - Fig. 2
To lower the piston slowly open the release valve (counterclockwise) to gently lower the supported load.
Remove the handle
Caution: Never leave the bottle jack unattended while it is carrying any load. It is designed to slowly reduce
pressure over time and will lower the load! Always use support stands!
