p 3
Eraser Company Inc. • Syracuse, NY USA • Ph: 315-454-3237 • [email protected] • www.eraser.com • Fax 315-454-3090
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a licensed electrician if in doubt as to
whether the machine is properly grounded.
SAFETY FIRST - USE BEST PRACTICES
ALWAYS USE SAFETY GLASSES.
Everyday
eyeglasses only have impact resistant lenses; they
are NOT safety glasses. Also use face or dust mask
if cutting operation
is dusty.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form a habit of checking to see that keys and
adjusting wrenches are removed from machine
before turning it on.
KEEP WORK AREA CLEAN.
Cluttered areas and
benches invite accidents. Always leave at least 12”
(305 mm) of space around all sides and top of unit.
DON’T USE IN DANGEROUS ENVIRONMENTS.
Do not use or locate machine in high-humidity
environments, or expose to rain. Keep work areas
well lighted.
WEAR PROPER APPAREL.
Do not wear
loose clothing, such as gloves, neckties, rings,
bracelets, necklaces or any other clothing or
jewelry that might get caught in moving parts. This
is not an all-inclusive list. Wear protective hair
covering to contain long hair. Non-slip footwear is
recommended.
DON’T OVERREACH.
Maintain proper footing and
balance at all times.
MAINTAIN BLADES WITH CARE.
Keep blades
sharp and clean for optimal performance. Follow
instructions for lubricating and changing blades and
all accessories.
DISCONNECT MACHINE FROM POWER SUPPLY.
Unplug the unit before servicing and when changing
accessories.
DO NOT EXCEED THE UNIT’S MAXIMUM
MATERIAL SPECIFICATIONS.
Eraser’s warranty
will be null and void if machine has been used in any
manner that is contrary to these instructions.
CHECK FOR DAMAGED PARTS.
Before continued
use of the machine, the guard and all moving parts
should be carefully inspected to ensure that nothing
is damaged.
Ensure proper alignment of moving parts. Check
for any binding of moving parts, breakage of parts,
and any other condition(s) that may affect operation.
Any damaged part(s) should be properly repaired or
replaced prior to any continued use of the machine.
ONLY ALLOW TRAINED AND QUALIFIED
PERSONNEL TO OPERATE UNIT.
Always keep
these instructions within reach of the machine.
USE RECOMMENDED ACCESSORIES ONLY.
Consult this operating manual for recommended
accessories. Use only parts supplied by The Eraser
Company, Inc. Use of improper accessories will void
Eraser’s warranty and may increase risk of injury.
ALL REPAIRS SHOULD BE PERFORMED BY AN
ERASER COMPANY REPRESENTATIVE ONLY.
Unauthorized disassembly of machines will void
Eraser’s warranty.
WHEN USING MACHINERY, ALL SAFETY
PRECAUTIONS – INCLUDING, BUT NOT LIMITED
TO, THOSE LISTED ABOVE - SHOULD BE
FOLLOWED TO REDUCE THE RISKS OF FIRE,
ELECTRIC SHOCK, AND PERSONAL INJURY,
AND DEATH.
IMPORTANT: NO LIABILITY WILL BE INCURRED
BY THE ERASER CO. FOR INJURY, DEATH, OR
PROPERTY DAMAGE CAUSED BY A PRODUCT
WHICH HAS BEEN SET UP, OPERATED, AND/OR
INSTALLED CONTRARY TO ERASER’S WRITTEN
OPERATING MANUAL, OR WHICH HAS BEEN
SUBJECTED TO MISUSE, NEGLIGENCE, OR
ACCIDENT, OR WHICH HAS BEEN REPAIRED
OR ALTERED BY ANYONE OTHER THAN THE
ERASER COMPANY, OR WHICH HAS BEEN
USED IN A MANNER OR FOR A PURPOSE FOR
WHICH THE PRODUCT WAS NOT DESIGNED.
OPERATING INSTRUCTIONS
SET-UP:
The RTC1 is supplied with one 3/32”, one 7/64”, one
1/8”, one 5/32” & one 9/64” Allen wrench. Bushings
must be purchased separately.
Model RTC1 Rigid Tube Cutter
