Equipment Technologies APACHE AS1010, Руководство пользователя, Страница: 65 / 124

WET SYSTEM OPERATION
4-29
NOTE: The eductor hoses are flexible and
may be kinked while in the “up” position. This
is normal and will not cause any damage to
the hoses or equipment.
Loading Liquid and/or Powdered
Chemical with Suction Lance
NOTE: The suction lance must be purchased
separately. It is not included with the chemi-
cal eductor.
NOTE: Lance suction is dependent on educ-
tor pressure and flow. For best results, use
highest pressure available (up to 150 PSI
maximum).
8. Insert lance body with o-ring into eductor
until the o-ring is sealed.
9. Use the free end of the lance to pierce
bag or container to vacuum powdered or
liquid chemical.
10. Rinse lance. Place lance end into a clean
container of water to rinse lance assem-
bly.
11. Remove lance body from eductor and
drain any remaining fluid into hopper.
12. Close hopper ball valve. Turn inlet valve
(yellow handle) off.
Shutdown
1. Ensure that:
• All valves are closed. Be sure to close
the hopper ball valve first. (Close by
moving handle into a horizontal posi-
tion.)
• Chemical residue has been cleaned.
• Hopper lid is closed and locked by
turning cover clockwise.
2. Divert pump flow back to normal opera-
tion.
3. Raise eductor to up positions and insert
latch pin.
NOTE: Do not store a contaminated lance in
the Apache Sprayer cab.