Equipex sodir panini xl, Руководство по эксплуатации

Страница: 3 / 12

INTRODUCTION
The SODIR Panini Grills — Models PANINI XL and PANINI XLE — are uniquely designed to
offer quality cooking. These units are constructed of food service quality stainless steel,
and use fine grain cast iron top and bottom cooking surfaces. The grills are versatile
in application and easy to operate. The moveable top is spring counter-balanced. Top
and bottom heating elements are thermostatically controlled up to 570 F. The units
come equipped with a removable front drip tray and a handy scraper. All models are
available with grooved, flat or mixed grill plates. Model PANINI XLE is equipped with the
programmable electronic countdown timer with three independent time settings.
SPECIFICATIONS:
Model Electrical
PANINI XL 208/240V, 1PH,
3.6KW, 13/15 Amps
PANINI XLE 208/240V, 1PH,
3.6KW, 13/15 Amps
Plug Configuration
NEMA-6-20P
NEMA-6-20P
PANINI XL/XLE 120V, 1.75KW 15 Amps
NEMA-5-15P
OPERATION
INITIAL SET-UP
The PANINI XL/XLE requires the installation of four (4) legs, two (2) utensil shelves and
the front drip tray.
Take the unit out of the box. Position it carefully on its top on a flat, nonabrasive work
surface. Remove four (4) legs and two (2) utensil shelves from the packaging. Align
bigger cutouts in one of the utensil shelves with the threaded mounting holes for the legs
located along one of the sides of the grill. Attach two legs to the body of the unit, thus
securing the utensil shelf. Make sure that the legs are attached tightly against the body.
Repeat the procedure with the
second utensil shelf. Put the grill in its working position. DO
NOT use legs as the lever when turning the unit. Insert the drip tray into the aperture at the
front of the grill.
The grill is shipped with an application of protective oil on the upper and lower grill
plates. This oil will need to be removed prior to the seasoning process using a mild
soap and water solution.