Equipex SODIR FC-60, Руководство по эксплуатации

Страница: 4 / 6

CLEANING
WARNING: Disconnect (unplug) electrical power supply before
cleaning or servicing
Cleaning is very important in maintaining a safe and well working machine. Allow
the oven to cool before cleaning. Remove the baking wire racks and clean them
separately using a damp cloth or sponge and mild cleaning liquid soap. Use a
cloth dampened slightly with a soap and water mixture to clean all exterior and
interior stainless steel surfaces and glass. Use a clean lint-free cloth to remove
the excess water or soap.
DO NOT use abrasive sponge on exterior or interior surfaces
DO NOT wash oven under running water
DO NOT spray the exterior motor housing with any liquid
DO NOT allow water to drip into the motor housing or onto electrical component
OVEN DOOR REMOVAL
The SODIR Models FC-60 and FC-60/1 are equipped with a double glass door
which is easily removable for cleaning. For cleaning, remove the door following
the steps below:
• Open the door completely
• Move each hinge lock to “UP” position (one lock per hinge)
• Tilt the door up at 45 – 60 degree angle (hinge lever arm will be
released)
• Pull the door out of the hinge slots
Upon removal, the door can be washed or cleaned both on the inside and the
outside. To install the door, reverse the procedure. DO NOT leave the hinge lock
in “UP” position at the end of installation.
MAINTENANCE
Inspect all parts on a regular basis to ensure that the parts are in good working
order. If a part is damaged, have the unit repaired by an authorized service
agency prior to returning the unit to operation. If you have trouble locating a
service agency in your area, call
EQUIPEX, LTD.
at 1-800-649-7885 and ask
for customer service.