OPERATION
Preheating
To preheat the convection oven, select the desired temperature by rotating the thermostat knob clockwise
to desired temperature setting and then turn the timer knob that also acts as an ON/OFF switch
clockwise to the maximum setting (120 minutes). Both indicator lights (green and orange) will be lit.
The orange light will stay on until the oven reaches the desired temperature. The green light will stay on
until the timer reaches the indicated time setting. Allow 7 to 15 minutes for the preheating process.
Cooking
After the preheat process is completed, select the desired temperature (unless it is already set) and turn
the timer knob to select the time setting. When the set time is elapsed, the heating element and the
blower fan will be switched off and the green indicator light will go out.
The
SODIR
convection ovens can be used for a wide variety of foods. Cooking times will vary depending
on food products, temperature settings and desired results.
Cleaning
WARNING: Disconnect (unplug) electrical power supply before cleaning
Cleaning is very important in maintaining a safe and well working machine. Allow the oven to cool
before cleaning. Remove the baking racks and the bake pan, and clean them separately using a damp
cloth or sponge and mild liquid soap. Use a cloth dampened slightly with a soap and water mixture to
clean all exterior and interior stainless steel surfaces. Use a clean lint-free cloth to remove the excess water
or soap.
DO NOT
use an abrasive sponge on exterior or interior surfaces
DO NOT wash the oven under running water
DO NOT spray the exterior motor housing with any liquid
DO NOT allow water to drip into the motor housing or onto electrical components
You should inspect all parts on a regular basis to ensure that all is in proper working order. If a part is
damaged, have the unit repaired by an authorized service agency prior to returning the unit to operation.
If you have trouble locating a service agency in your area, please consult our website at
http://www.equipex.com/
, or call us at 1-800-649-7885 and ask for customer service.
These models must be taken to a service facility; in-store service is not covered.
