Manual_
Page 12
www.equip-info.net
4.4 Connecting the Power Adapter
After an appropriate power adapter has been identified, simply plug it into the external
adapter jack of the USB 2.0 PCMCIA Adapter.
5. Troubleshooting
This chapter outlines the solutions to some challenges Windows users have encountered
when using the USB 2.0 PCMCIA Adapter.
NOTE:
Most USB devices require USB device software drivers be installed prior to connecting to a
computer. When installing a USB device always follow the USB peripheral installation
instructions provided by the manufacturer.
1.
Windows Device Manager does not show the USB 2.0 PCMCIA Adapter.
SOLUTION:
(a) Check if the USB 2.0 PCMCIA Adapter is correctly installed in the CardBus
or PCMCIA II slot.
(b) Remove it and try and different CardBus or PCMCIA II slot in case there the bus
has conflicts.
(c) Repeat the driver installation procedures, then see if the device exists.