Manual_
Page 9
www.equip-info.net
7.2.2 Auto-Scan Function
Hot Key:
[Scroll] -> [Scroll] -> [S] -> [Enter] to BEGIN.
[Scroll] -> [Scroll] -> [S] -> [Enter] to STOP.
You can activate the Auto-Scan function by using the following two-step Hot Key
sequence. To send commands to the Combo KVM Switch, press the [Scroll] key twice
(Step 1), then press [S] and then press [Enter] (Step 2). When you press the Auto-Scan hot
key sequence, the Combo KVM Switch alternates between the two or four PCs and dis-
plays them on the monitor.
Each PC is display one of time interval from 5 ~ 250 seconds (The interval is adjustable)
before switching to the next. When you press the Auto-Scan Hot Key sequence again, the
Auto-Scan will stop and the monitor screen will jump back to the original PC.
Adjustable scan time interval setting ( 5 ~ 250 sec. )
Hot-key:
Pressing the <Scroll >, <Scroll > then <S> and <5 ~250 > <Enter>
7.2.3 Beeper Enable
Hot Key:
[Scroll] -> [Scroll] -> [B] -> [Enter] to Disable
[Scroll] -> [Scroll] -> [B] -> [Enter] to Enable
The Speaker/Beeper’s default setting is “Enable”. While the switching connections are
activated and Speaker/Beeper is in “Enable” status, the beeper has a short beeping
sound.
