![background image](http://html1.mh-extra.com/html/equip/650329/650329_installation-manual_2421118008.webp)
product
2
1
Step 1:
When the mount is powered on, press the small button
on the control box with a thin tool as shown. The unit emits a
beep, indicating that the control box is on standby for program coding.
Step 2:
Press the “ ”button on the remote control, and the control box repeatedly beeps for approximate 10 seconds indicating
that the remote control is being programmed. The process will be finished automatically until you can't hear a beep any longer.
Note:
The TV M
oun
t c
a
n be m
atc
h
e
d w
it
h up to 20 r
e
m
ot
e c
ontrollers
.
To clean up the data of all the remote controllers,
press and hold the code matching button for 5 seconds then release. The unit will emits two beeps confirm the successful clean up
and vice versa.
SET
C. Coding of Remote Controller and Control Box
Remote Control Problems
1. Abnormal Loss Of Power
(Normally Batteries Are Out Of Power After 24hrs Without
Using The Remote Control.)
Please contact us to replace remote control.
1. The Buzzer Constantly Gives Out Alarm Sound:
The Error Of Positioning Signal
Reset the system by following the instruction manual. If the alarm
sound continues, please contact us to replace the product.
In Front
Error
Indication
This repair guide intents to help you identify and solve the minor problems caused by unusual operation of the electric system
of our electric TV mounts. The simple procedures in this manual are easy to follow and capable of solving the most problems
happened in everyday use.
2
1
24hrs
2. Buttons On Remote Control Don’t Work.
Please check if the batteries have power. If the problem isn’t solved,
please contact us to replace the remote control. If the problem is still
not solved after the replacement, please contact us to replace the
product.
1
product
2
3. The Insensitivity Of Remote Control
(The Functional Distance Is Less Than 3m.)
Please replace the batteries. If the problem is still not solved,
please contact us to replace remote control.
1
Abnormal Operation:
The TV Mount Can’t Be Adjusted To 0° Or 75°
Please reset the system by following the instruction manual.
If the problem is still not solved, please contact us to replace
the product.
Can’t Operate
Please check if the power adaptor is properly connected to
the product. If so, please turn the power on. If there is no buzzer
sound or red light power indication, please check if the power
adaptor works properly. If the power adaptor doesn’t work please
contact us to replace the power adaptor. If the power adaptor
works properly, but the TV mount doesn’t work, please contact us
to replace the product.
Abnormal Noise
Please contact us to replace the product.
OR
2
1
product
1
2
product
2
or
3
product
1