6.
G
H
Neve
r o
perat
e the u
ni
t
wit
h
ou
t a TV i
nstalled.
Do not
o
pe
n the e
lectrica
l c
ove
r p
lease.
WARNING:
WARNING:
Remote Control Operation Instructions
1.Upward/Downward Movement
A. Button Functions
OK
Press the " " button, the TV mount will move upward to the lowest-profile position against the ceiling.
Press the " " button, the TV mount will move downward to the maximum tilt angle position (75° by default).
Press the " " button to stop the motion. (Tips: Clear up all obstacles within the range of motion.)
2.Memory Setting
Press the " " or " " button for 1 seconds and you will hear a beep, indicating that the current position
has been saved to memory. The " " " " buttons can each store a different position.
3.Recall Memory
Press the " " or " " button and the mount will automatically get to the position saved in the
corresponding button " " or " ".
OK
OK
4. Reset Mode
If the TV mount can't be adjusted to the highest position(0 degree against the ceiling) or the lowest position
(max. tilting position), unplug and re-plug the power. Then press and hold the " " button for 5 seconds.
Mount will retract to the highest position, that means the system has been successfully reset.
5.Reset the Tilt Range for Pitched Ceiling
The TV mount is 0°~75° adjustable by default. Please reset the tilt range if you use as a pitched ceiling TV mount.
Prepare:
Reset the system (see Instructions on A. Button Functions - 4. Reset Mode).
Step 1:
Press " ", " " and " " buttons and adjust to the proper position.
Step 2:
Press and hold the " " button until the unit beeps once. Repeat
this step 5 times. The unit will emit a long beep to indicate success.
Note:
Ste
p 1, 2 sh
oul
d be f
inis
h
e
d in 2 m
inutes
, or it w
il
l f
ai
l to r
eset.
Note:
The r
e
m
ot
e c
ontrolle
r is p
owere
d by t
w
o A
A
A b
atterie
s (
no
t i
ncluded)
.
B. Manual Mode
In any position (but the minimum position against the ceiling), when manually push up the TV ceiling mount
over a distance. The TV ceiling mount will automatically return back to the minimum position against the ceiling.
RMT-02
romote control
