Installation:
• Plug in the AC/DC power supply to the power jack of the switch; then connect it to a power outlet
• Connect the HDMI cables from the source devices e.g. DVD player, Set-Top-Box, etc. into one of the
HDMI input ports
• Connect the HDMI cable for the output device fi rst into the output port of the switch and then into the
HDMI input port of your TV, monitor or projector
Operation:
Power on or off the HDMI Switch:
• Press and hold the „Switch/Power“ key on the HDMI Switch until the „Power“ indicator LED turns on or off
• Press the „Power“ key on the IR remote controller to turn on or off the HDMI Switch
Select desired HDMI source port by the front panel of the HDMI Switch:
Press the „Switch/Power“ key on the HDMI Switch repeatedly to switch between port one to port four in
sequenz; the red LED indicator will turnwill trun on for easy distinguish of the selected channel
Select desired HDMI source port by the IR remote controller of the HDMI Switch:
Press the number 1~4 key on the IR remote controller to select the desired channel directly or press the
„<“ or „>“ key to select previous / next channel
Auto-Switching function:
After power on the HDMI Switch, when any of 4 connected HDMI source devices are on and outputting
„Live“ HDMI signals to the HDMI switch , the HDMI switch will automatically select the „Live“ HDMI
channel.
Last-Channel-Memory function:
After power on the HDMI Switch without receiving any „Live“ HDMI signals from the source devices,
the HDMI Switch will automatically switch to the last used channel.
Special Note:
Please be carefull when selecting your HDMI connection cables - non certifi ed HDMI cables may affect
your signal and display quality!
Manual_
Page 4
www.equip-info.net
