www.prolight.co.uk
Stage Haze 1500
User Manual
4
Operation:
Place the unit on a level surface.
Always disconnect it from the mains supply before filling as fluid could be spilled.
Fluid replenishment:
Always fill the tank away from the unit to prevent fluid getting inside the main housing.
If fluid should get inside the main housing, disconnect the unit from the mains immediately
and consult a technician.
Release pipe from top of bottle by pushing the metal collar towards the fluid tank. Then remove velcro
strap securing tank and remove tank. Once out and away from unit, stand the tank upright so the cap
is pointing towards the ceiling. Turn cap counter-clockwise to remove, then fill tank with fluid and
replace cap turning clockwise until tight. Slide bottle back into the unit and secure with velcro strap.
Then reattach the fluid pipe by pushing it into the metal collar on the fluid cap, making sure it clicks
securely into position.
Installation:
Install the unit in a well-ventilated area. Use in an insufficiently ventilated room can lead to the
condensation of the haze fluid. The resulting slippery surface can cause accidents. Keep a minimum
distance of 1m around the unit.
Furthermore do not orientate the output aperture directly in the direction of the audience’s eyes.
In order to create the best effect, there should be a distance between the unit and the audience
of at least 3m.
Only install the haze machine on fire resistant, scratch resistant and water resistant surfaces.
Operating instructions
Operating instructions
DANGER OF FIRE!
When installing the unit, make sure there is no highly flammable
material (decoration articles etc) within a minimum distance of 1m
DANGER TO LIFE!
Disconnect from the mains before starting maintenance
Only use quality haze fluids recommended by your dealer. You must
not use substances which are classified as ‘DANGEROUS WORKING
MATERIALS’ or ‘FLAMMABLE FLUIDS’.
