www.prolight.co.uk
PFM1500 Foam Machine
User Manual
6
Operation:
Connect the foam fluid input hose to a sufficient amount of foam fluid. Information on this can be found
on the previous page.
Connect the unit to a mains power supply via a powerCON TRUE1 cable.
Now turn on the fan by pressing the green button situated on the top panel.
This will illuminate to indicate the fan is on.
Now turn on the pump by pressing the red button situated on the top panel.
This will illuminate to indicate the pump is on.
Please note: the pump will take a little time to pump the fluid through and start outputting.
This should be primed prior to use.
Cleaning and maintenance:
We recommend a frequent cleaning of the unit. Please use a soft lint-free and moistened cloth.
Never use alcohol or solvents!
The fluids we recommend are non-hazardous to the environment and can be disposed of via the
sewage system.
There are no serviceable parts inside this unit.
Maintenance and service operations are only to be carried out by authorised dealers.
Replacing the fuse
Only replace the fuse with a fuse of the same type and rating.
Before replacing the fuse, unplug the mains cable.
Procedure:
Step 1:
Open fuse holder on the top panel with a screwdriver.
Step 2:
Remove the old fuse from the fuse holder.
Step 3:
Install the new fuse in the fuse holder.
Step 4:
Replace the fuse holder in the housing.
Should you need any spare parts, please use genuine parts.
Should you have any further questions, please contact your dealer.
Operating instructions
POWER INPUT:
220-240V~50/60Hz
FUSE:
F30A 250V
FAN
WATER
PUMP
DO NOT OPERATE WITHOUT
EQUINOX FOAM FLUID
POWER INPUT:
220-240V~50/60Hz
FUSE:
F30A 250V
FAN
WATER
PUMP
DO NOT OPERATE WITHOUT
EQUINOX FOAM FLUID
