www.prolight.co.uk
PFM1500 Foam Machine
User Manual
2
Safety advice
WARNING:
FOR YOUR OWN SAFETY, PLEASE READ THIS USER
MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!
• Never let the power cable come into contact with other
cables. Handle the power cable and all mains voltage
connections with particular caution!
• Never remove warning or informative labels from the unit.
• Do not open the equipment and do not modify the unit.
• Do not switch the equipment on and off in short intervals,
as this will reduce the system’s life.
• Only use the equipment indoors.
• Do not expose to flammable sources, liquids or gases.
• Always disconnect the power from the mains when
equipment is not in use or before cleaning! Only handle
the power-cable by the plug. Never pull out the plug by
pulling the power-cable.
• Make sure that the available mains supply voltage is
240V AC, 50Hz.
• Make sure that the power cable is never crimped or
damaged. Check the equipment and the power cable
periodically.
• If the equipment is dropped or damaged, disconnect the
mains power supply immediately and have a qualified
engineer inspect the equipment before operating again.
• This unit is not intended for fixed installation.
• If the equipment has been exposed to drastic
temperature fluctuation (e.g. after transportation),
do not connect power or switch it on immediately.
The arising condensation might damage the equipment.
Leave the equipment switched off until it has reached
room temperature.
• If your product fails to function correctly, stop use
immediately. Pack the unit securely (preferably in the
original packing material), and return it to your Prolight
dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be
carried out by a qualified technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS.
• This fixture is for professional use only - it is not designed
for or suitable for household use. The product must be
installed by a qualified technician in accordance with local
territory regulations. The safety of the installation is the
responsibility of the installer. The fixture presents risks of
severe injury or death due to fire hazards, electric shock
and falls.
• WARRANTY: One year from date of purchase.
• Before your initial start-up, please make sure that
there is no damage caused during transportation.
• Should there be any damage, consult your dealer
and do not use the equipment.
• To maintain the equipment in good working condition
and to ensure safe operation, it is necessary for the user
to follow the safety instructions and warning notes written
in this manual.
• Please note that damages caused by user modifications
to this equipment are not subject to warranty.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the
warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and/or property.
Before filling the unit disconnect the mains. Never fill with hot liquids.
Only use high quality, water based foam fluid recommended by the manufacturer.
Other foam fluids may cause clogging and void the guarantee.
Always make sure there is sufficient foam fluid present. Operating this foam machine without foam fluid will
cause damage to the pump.
Operate the unit only after you have familiarised yourself with its functions. Do not permit operation by persons not qualified
for operating the unit and always drain the tank and use the original packaging if the unit is to be transported.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused
by the non-observance of this manual or any unauthorised modification to the equipment.
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
