Equinox Systems MoonPar, Руководство пользователя

Страница: 10 / 12

www.prolight.co.uk MoonPar User Manual
10
01 - Sets the unit into blackout off/on (LED on/off)
02 - One press activates the sound modes, use the ‘UP’ and
‘DOWN’ buttons to select the sound mode.
The second press activates the strobe mode, use the
‘UP’ and ‘DOWN’ buttons to select the strobe speed.
03 - Activates colour mix mode, press once and use the
‘UP’ and ‘DOWN’ buttons to select the brightness of red.
Press a second time and use the ‘UP’ and ‘DOWN’
buttons to select the brightness of green. Press a third
and final time and use the ‘UP’ and ‘DOWN’ buttons to
select the brightness of blue.
04 - One press activates the auto modes, use the ‘UP’ and
‘DOWN’ buttons to select the auto mode.
The second press activates the colour combination
mode, use the ‘UP’ and ‘DOWN’ buttons to select the
required colour combination.
05 - One press activates the colour fade mode (LEDs), use
the ‘UP’ and ‘DOWN’ buttons to select the speed.
One press activates the colour fade mode (Moonflower),
use the ‘UP’ and ‘DOWN’ buttons to select the speed.
06 - One press activates the colour change mode (LEDs),
use the ‘UP’ and ‘DOWN’ buttons to select the speed.
One press activates the colour change mode
(Moonflower), use the ‘UP’ and ‘DOWN’ buttons to select
the speed.
07 - Activates the motor speed setting use the ‘UP’ and
‘DOWN’ buttons to select the speed.
08 - Saves the current setting.
09 - Activates the DMX mode. Use the ‘UP’ and ‘DOWN’
buttons to adjust the DMX address or type in the
address via the numbers - ie. address for address 051
you would need to press ‘0’ followed by ‘5’ and then ‘1’.
10 - Used to set the DMX address - ie. address for address
051 you would need to press ‘0’ followed by ‘5’ and
then ‘1’.
Adjusts the auto mode, sound mode, colour fade mode,
colour change mode, strobe and motor speeds, DMX
address and colour mix brightness value
Operating instructions
05
09
02
01
03
08
10
04
06
07
11
IR remote functions: