background image

ii

Equinox Megaport SS Board Series Hardware Manual

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Notice

© 1995, 1996 Equinox Systems Inc.  All rights reserved.   Reproduc-
tion without permission prohibited.

Equinox, Megaport, Megaplex, and SuperSerial are registered trade-
marks of Equinox Systems Inc.   All other brands and product names
are trademarks of their respective holders.

Equinox makes no representations or warranties with respect to the
contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.  Information is
subject to change without notice and does not represent a commitment
on the part of Equinox Systems Inc.

The equipment has been tested and found to comply with the limits for
Class A digital devices, pursuant to Part 15 of the FCC rules.  These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environ-
ment.   This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
Operation of this equipment in a  residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at his own expense.

NOTE:  The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the
equipment.

Megaport SS, Serial I/O Board Series, Hardware Manual

560092/B (March 1996)

Equinox Systems Inc.

One Equinox Way

Sunrise, Florida  33351-6709

 (954) 746-9000

Fax: (954) 746-9101

BBS: (954) 746-0282

e-mail:  [email protected]

FCC Notice

Содержание Megaport SS Serial I/O Board Series



































Отзывы: