Equinox Systems Megaport SS Serial I/O Board Series, Руководство по установке и справочник по аппаратуре

Страница: 18 / 34

2-6 Equinox Megaport SS Board Series Hardware Manual
3. Tighten the screws to hold the cable securely to the board.
Equinox wiring accessories convert the 50-pin telco terminating
connector(s) to DB-25 or RJ-11 modular jacks for distribution of ports
to external devices such as terminals, modems and printers. Telco
pinouts and wiring diagrams for the Megaport SS Board accessories are
found in Chapter 3, Cabling Devices To Ports.
Equinox 25-pair extension cables may be used to extend the distance
from the cable attached to the Megaport SS Board to the cabling
accessories. These cables plug into distribution panels, punch blocks,
fan-out cables and modular splitters. Extension cables in various
lengths are available from Equinox.
Installing the Adaptor
Cable
Equinox Wiring
Accessories
Connect the adaptor cable to the Megaport SS Board connector as
follows:
1. Locate the 100-pin female connector on the Megaport SS
Board.
2. Notice that the 100-pin cable connector is keyed such that it
can only attach to the board in one orientation. With the cable
properly oriented, insert the 100-pin male cable connector into
the female Megaport SS Board connector and press firmly.