Equinox Systems LIGHTNING CRACKER 2, Руководство пользователя

Страница: 4 / 8

You should find inside the Equinox carton the following items:
1, Equinox Lightning Cracker 2 strobe 2, Instruction manual
Technical Specifications:
DMX channels: 2
Voltage: AC 240V - 50Hz
Fuse: F2A-250V Amp
Power consumption: 73W
Dimensions: 378 x 116 x 166mm
Weight: 1.8Kgs
Operations:
There are 3 operating modes to choose from:
1, Manual 2, Sound Active 3, DMX
Manual Mode
To run the Lightning Cracker 2 Strobe in Manual mode, press the press the “MODE” button to show
“F-X” on the LED display. To adjust the speed simply use the “UP” and “DOWN” buttons to select the
desired speed level from 0- 9 (0= off, 9=fast).
To adjust the brightness, press the “MODE” button to show “C-X” on the LED display. now use the
“UP” and “DOWN” buttons to select the desired brightness output level from 0- 9 (0= off, 9=high).
Sound active Mode
To run the Lightning Cracker 2 Strobe in Sound active mode, press the “MODE” button to show “S-X”
on the LED display. To adjust the sound sensitivity level simply use the “UP” and “DOWN” buttons to
select the desired sensitivity level from 0 - 9 (0=off, 9=high).
DMX Mode
To run the Lightning Cracker 2 Strobe in DMX mode, press the “MODE” button to show “ADD” on the
LED display and set your DMX address using the “UP” and “DOWN” buttons from “000-512” .
Now connect your DMX controller to the DMX input socket on the rear of the unit and the LED below the
last digit “ADD.” will flash to show it is receiving a DMX signal.
DMX Chart
Equinox Lightning Cracker 2 Technical specifications