Equinox Systems LIGHTNING CRACKER 2, Руководство пользователя

Страница: 5 / 8

Over view
Main features
• 6 x 10W White Linear LEDs • Large coverage area
• Adjustable flash and intensity rate • Flash rate range of 1 - 10 Fps
• Adjustable hanging yoke • 3-pin XLR in/out sockets
• Analogue remote in/out sockets • 3 push button menu with LED display
DMX-512:
• DMX (Digital Multiplex) is a universal protocol used as a form of communication between
intelligent fixtures and controllers. A DMX controller sends DMX data instructions form the
controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA
“IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a data “out”
terminal).
DATA Cable (DMX cable) requirements (for DMX operation):
• The Equinox Lightning Cracker 2 can be controlled via DMX-512 protocol. The DMX address is set on
the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data
input/output (figure 1).
Figure 1
Also remember that DMX cable must be daisy chained and cannot be split.
Equinox Lightning Cracker 2 Overview
Further DMX cables can be purchased from
all good sound and lighting suppliers or
Prolight dealers.
Please quote:
CABL10 – 2M
CABL11 – 5M
CABL12 – 10M
POWER SUPPLY
240V - 50Hz
FUSE:
F2A/250V