Lay down the channel so the flat
surface is facing down and then
rotate the axle until the holes line up,
making the top of the axle level with
the flat part of the channel.
Insert 2 M10 x 65 mm hex head bolts
and put one M10 washer and one
M10 lock nut on each bolt.
Tighten nuts and bolts.
For this stage you will require:
(1) Channel
(1) Axle
(2) M10 x 65 mm Hex Head Bolts
(2) M10 Washers
(2) M10 Lock Nuts
Stage 1: T Frame Assembly
EXPLORER TRF
EXPLORER TRF
L-BRACKETS:
Your
assembly
should
now
look
like
this.
FIGURE 1
FIGURE 2
FIGURE 4
FIGURE 3
