Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850, Инструкция по установке и эксплуатации

Страница: 60 / 100

48 CCM4850 Installer/User Guide
Quit Command
The Quit command terminates the current CCM appliance session and terminates your Telnet
connection to the unit.
Access right: none needed
Access level: all
Syntax
QUIT
Resume Command
The Resume command exits the CLI and resumes your connection to the attached serial device.
The history buffer contains any data received while you were in CLI mode.
Access right: none needed
Access level: all
Syntax
RESUME
Server Commands
The Server command has several forms, as listed in Table 5.9.
Table 5.9: Server Command Summary
Command Description
Server CLI
Specifies the console port type, CLI access character, modem initialization
string, port history mode operations and port time-out value. It also enables/
disables device connection from the console port.
Server FLASH Updates the unit’s FLASH.
Server PPP Enables/disables PPP connections to the console port.
Server RADIUS Specifies RADIUS server parameters.
Server Reboot Reboots the unit.
Server Security
Specifies user authentication method, enables/disables security lock-out and
enables/disables connection methods.
Server Set Changes the CCM appliance network configuration.
Server SNMP Enables/disables UDP port 161 SNMP processing.
Server SNMP Community Defines read, write and trap SNMP community strings.
Server SNMP Manager Defines/deletes SNMP management entities.