Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 100

background image

14

CCM4850 Installer/User Guide

port, you may also access devices through a remote terminal or PC that can dial into the external
modem. For information about modem connections, see

Configuring and using dial-in connections

Server CLI command

To connect to a device from the console port:

1. Issue a Server CLI command, using the Connect parameter to enable the use of the Connect

command from the console port.

SERVER CLI CONNECT=ON

2. Issue a Connect command to the desired port.

CONNECT <

port

>

3. To end a device session that was initiated with a Connect command, issue a Disconnect command.

DISCONNECT

For more information, see

Server CLI command

Connect Command

Disconnect Command

Configuring and using dial-in connections

You may attach an external modem to the console port for dial-in serial CLI access to the CCM
appliance. This may be used as a backup connection if the unit is not accessible from the network.
It may also be used as a primary connection at remote sites that do not have Ethernet network
capability. The modem must be Hayes compatible.

To specify a modem initialization string:

1. Issue a Server CLI command, using the Modeminit parameter to specify the modem initializa-

tion string.
SERVER CLI MODEMINIT=“<

string

>”

The string must be enclosed in quotes and must include at least the command settings ATV1
and SO=1, which cause the modem to issue verbose response strings and autoanswer the phone
on the first ring. For more information, see

Server CLI command

The modem initialization string is sent to the cabled modem when any of the following
conditions occur:
•

CCM appliance initialization

•

Detection of a transition of DSR from low to high

•

Completion of a call when DCD changes from high to low

2. Upon successful modem connection, press the

Enter

key until the login prompt appears.

To display modem configuration information:

Issue a Show Server CLI command.

SHOW SERVER CLI

For more information, see

Show Server CLI command

«
...
24
25
26
27
28
...
»

Содержание Equinox Console Manager CCM4850 CCM4850 CCM4850





































































































Отзывы:

Нет отзывов

Похожие инструкции для Equinox Console Manager CCM4850 CCM4850 CCM4850

Бренд: dbx Страницы: 2

Бренд: IBM Страницы: 63

Бренд: Clavister Страницы: 89

Бренд: Fortinet Страницы: 20

4-Port 10/100Mbps Ethernet Broadband Router

Бренд: AOpen Страницы: 41

Бренд: Telit Wireless Solutions Страницы: 113

Бренд: UNA AUTOMATION Страницы: 20

Бренд: Cypress Semiconductor Страницы: 16

LBON320AC Series

Бренд: Lindsay Broadband Страницы: 4

Бренд: Aaeon Страницы: 61

Бренд: Gigabyte Страницы: 18

Бренд: AXAGO Страницы: 2

Бренд: Technics Страницы: 20

Бренд: Handicare Страницы: 60

Бренд: Zalip Страницы: 76

Бренд: Extreme Networks Страницы: 51

Бренд: Axis Страницы: 64

Бренд: SHOWTEC Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды