Equinox Systems EQLED101, Руководство пользователя

Страница: 7 / 12

www.prolight.co.uk Dragonfly Quad User Manual
7
Blackout mode:
Blackout mode ensures when the fixture loses DMX signal it will blackout. To set the blackout mode,
press the
“MENU” button on the front of the master unit to show “Blackout” on the LCD display.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose “YES” or “NO” .
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Sound active mode:
To access the sound active mode, press the
“MENU”
button on the front of the unit to show
“Sound
State”
on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set
the sound mode
“ON”
or
“OFF”
. Press the
“ENTER”
button to confirm the setting.
To adjust the sound sensitivity, press the
“MENU”
button on the rear of the unit to show
“Sound Sense”
on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
sound sensitivity between 0-100. Press the “ENTER” button to confirm the setting.
Value: 0 - 100 (0 = low sensitivity, 100 = high sensitivity)
To exit out of any of the above options, press the “MENU” button.
Pan/Tilt restricted movements:
To access the sound active mode, press the “MENU” button on the front of the unit to show “Pati Mode”
on the LCD display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose
between the following:
“PanTilt Angle 1” - Tilt movement angle 210°, ideal for fixtures situated on the ground.
“PanTilt Angle 2” - Tilt movement angle 90°, ideal for fixtures mounted on the ceiling or similar.
“PanTilt Angle 3” - Tilt movement angle 90° (60° above horizon, 30° below horizon),
Pan movement 160°, Beams projected in audiences direction.
“PanTilt Angle 4” - Tilt movement angle 90° (75° front, 15 back),
Pan movement 160° ideal for fixtures mounted on the ceiling or similar.
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Pan Inverse:
To enable/disable pan inverse, press the “MENU” button on the front of the unit to show “Pan Inverse”
on the LCD display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose
“YES” or “NO” . Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Auto test:
To run the auto test function, press the “MENU” button on the front of the unit to show “Auto Test” on
the LCD display. Now press the “ENTER” button and the fixture will run its auto test.
To exit out of any of the above options, press the “MENU” button.
Operating instructions